And the tray can get too full that it begins to overflow. And then modify the legs to get the required tilt.Step 4: Finally, use a level to confirm if the refrigerator is properly leveled. Step 3: Take off the fill tube after which disconnect the wire harness linked to the ice maker and the refrigerator. To troubleshoot the water pressure, change off the water provide and disconnect the water line from the valve. To resolve this, test the water connections and safe them properly.2. Check the hose and drain pump for blockages. Incorrect drain hose position. 5D: High current error within the drain BLDC motor. All the appliance Repair men in Www.alexandriawasher present high quality repairs and services to the best standards of the business. Genuine Parts: We use solely real Electrolux alternative parts to make sure the longevity and reliability of our repairs. You should utilize a multimeter for continuity to test if the thermal fuse is the problem. Check that the ice maker sign arm will not be within the up or "Off" place if the ice maker isn't making any ice. Remount the ice maker, put the fill tube in place, and then screw the ice maker back on.Step 7: Test run the ice maker to make sure it's working correctly.
